- 9/22/2025
-
Nano ceramic or nano protection is a liquid chemical used on cars to protect the body and paint from external factors such as scratches, wash swirls, UV rays, bird droppings, and many other problems.
It is one of the most widely used protections around the world due to its high effectiveness, reasonable price, and the acceptable amount of time required to apply it to the car. If you want to protect your car with nano, you can do so at home.
Or you can request a car protection service in Kuwait from Motorgy, which offers used cars for sale in Kuwait. You can book the service quickly and easily, and the team from the company you choose will pick up your car and install the protection you have chosen as quickly as possible and at the best price.
Read also: What is nano ceramic for cars?
How to apply nano ceramic to a car
Now we will show you the correct steps recommended by experts for applying nano ceramic to your car, which are as follows:
Step 1: Place the car in a suitable working environment
The first thing you should do is place your car in a suitable place to work, preferably a closed garage free of dirt, dust, and strong air currents that may bring in dust and other debris, as the nano application process is precise and requires a completely clean place.
Step 2: Clean the paint thoroughly
The most important step in applying nano ceramic to a car is to clean the car thoroughly and remove all dirt, impurities, and dust from the paint so that it is ready for the next step. If dirt remains on the paint, it will cause problems for the nano ceramic and will be visible after application.
Read also: Nano ceramic coating Advantages and Disadvantages
Step 3: Remove stubborn dirt
If you notice stubborn dirt on the paint after washing the car normally, you must remove it using special products, whether cleaning materials or paste designed for cleaning paint. Run your hand over the entire paint surface and clean the areas where there is stuck dirt so that the paint is ready.
Step 4: Use polish
Once you have ensured that your car's paintwork is clean, you should now apply polish to all parts of the car. Polish removes minor scratches, wash swirls, and any other damage, as well as giving the paintwork a beautiful shine. Polishing is an essential and important step when applying nano ceramic to any car.
Step 5: Apply the nano coating to the car
First, you must read the product instructions and learn how to apply it in terms of hand movements, quantity, and other information that you can also search for online. Shake the container, then apply the appropriate amount to the special sponge and start applying it with movements from top to bottom and from left to right within a specific area of 2 by 2 cm, using normal and consistent pressure.
Read also: Steps for installing protective films on your car
Step 6: Wipe the area you have finished
Now wipe the area where you applied the product using a microfiber towel in a circular motion with little or no pressure to remove all paint residue. Then check your work using your phone's light to make sure there are no problems, and repeat if necessary. Make sure not to leave the nano for too long before wiping it off, as it may dry after 25 to 30 seconds. Do not use the same towel multiple times.
Step 7: Let the nano dry completely
Once you have finished applying it to all parts, keep your car in a dry and slightly cool environment for 10 to 15 hours or according to the product instructions, and keep it away from water and dirt until it is completely dry and ready to drive. You can also park it in the sunlight, but the weather must be clean and dust-free to speed up drying.
