- 11/16/2025
-
The process of installing window tinting is easy and enjoyable, and you can do it at home. You must first know the correct steps and the correct sequence to get the best results and avoid potential problems due to your lack of experience.
Installing window tinting on your car requires special tools to ensure that the process is done properly to protect your car from strong sunlight and keep it cool, as well as protecting you and your passengers from the harmful effects of UV rays on the skin.
If you want to buy a partially or fully protected car, Motorgy offers you used cars for sale in Kuwait at the best prices with the guarantee of sales experts. These cars are fully inspected to determine their condition, and the sales team will negotiate the price on your behalf while you relax at home. What are you waiting for?
Read also: How to choose the right tint for your car?
Steps for tinting your car
Below are the steps for installing tint on your car:
Step 1: Prepare the necessary tools
To complete this task, you will need some essential tools, such as:
- Window cleaning fluid
- Microfiber towel
- Tint film
- Spray bottle containing water and soap
- Tint squeegee
- Sharp knife or razor blade
- Heat gun or hair dryer
- Measuring tape
Step 2: Choose where you will work
You must choose where you will work carefully. The area must be clean and free of dust and dirt, and it must not be exposed to direct sunlight, so that it does not affect your work, especially the soap and water you will be using, as it will dry quickly.
Step 3: Clean all windows
Now clean all windows using cleaning fluid, and make sure they are free of any stains, bird droppings, or other dirt so that the tinting can be applied when they are completely clean. Be sure to wipe them with a microfiber towel to remove the cleaning fluid and any possible stains.
Step 4: Measure the windows
In this step, start by measuring the windows so that you can cut the tinting film accordingly, ensuring that you do not use too much or too little and have to redo it.
Read also: Things you should know before installing the tint on your car
Step 5: Cut the tint according to the measurements
Cut the tint films according to the measurements of each window separately so that you are ready to start applying them to the windows, or you can purchase tint that has been pre-cut to the measurements of your car windows from stores that offer this service.
Step 6: Wet the window
Take a spray bottle filled with soap and water and spray the window you want to tint from the inside until it is completely covered with liquid to facilitate the installation process.
Step 7: Remove the protective film from the tint
Now take the tint, remove the protective cover, and place it on the window from the inside, taking into account the measurements and covering all edges from top to bottom.
Step 8: Use the squeegee
Use the squeegee provided to apply the tint and start wiping it on the window with some pressure so that it sticks well, and to remove any air bubbles, water, and soap from underneath it. Make sure that no creases form, as they will ruin it.
Read also: The importance of car window tinting
Step 9: Cut off the excess tint
After making sure that the tint is aligned with the edges of the windows and free of any air bubbles, water, creases, or wrinkles, cut off the excess edges using a sharp knife or blade, leaving a small gap of 1 to 2 mm around the edges and wrap it around them using a heat gun so that it does not peel off later.
Step 10: Use the heat gun on the entire tint
Now use a heat gun or hair dryer to gently heat the tint to ensure that it adheres well to the windows, adapts better to the shape of the window, and removes any remaining air or water bubbles. Keep the heat source slightly away from the tint so that it does not damage or burn it.
Step 11: Let it adhere completely
Some types of window film require you to keep the windows raised and not open them for a certain period of time, which may be hours or even days, so that it adheres completely and does not move when you open and close them. Follow the instructions to get the best results without any problems later on.
